Fenix E03R V2.0 wiederaufladbare Taschenlampe GE, rot
Fenix E03R V2.0 wiederaufladbare Taschenlampe GE, rot
Out of stock
Specification
Specification
Fenix E03R V2.0 Gift Edition is the successor to the successful miniature rechargeable torch, which can be carried on your keys or in your bag. Despite minimal dimensions and a weight of just 30 grammes, it offers a high light output of up to 500 lumens (ANSI). The light beam evenly illuminates a wide area up to a distance of 90 metres. Power is supplied by an integrated Li-pol rechargeable battery with a capacity of 400 mAh, which charges via a modern USB-C connector on the side of the torch. There are four white light modes and two red light modes available, with a maximum runtime of up to 30 hours in the lowest mode. A unique innovation is the so-called Breathing light, a pulsing light around the power button with an intensity of 1 lumen, which you can use for discreet signalling or to identify the location of the torch and your key ring. The torch is supplied including a key ring attachment, so you can easily carry it with you at all times. The battery charge status indicator in the button is also practical. With this useful gift, you will always bring joy.
All torch parameters (light output, battery runtime, water resistance, impact resistance and beam distance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.
Fenix E03R V2.0 Torch Specifications
- Two white MATCH CA18 LEDs and one red Everlight 2835 LED are used. All with a lifespan of 50,000 hours.
- Four white light modes: 500 lumens (1.3 hours) → 150 lumens (2 hours) → 30 lumens (6.5 hours) → 5 lumens (30 hours).
- Two red light modes: 5 lumens → red flashing (5 lumens).
- Pulsing light around the power button with an intensity of 1 lumen (Breathing light).
- The torch is powered by a built-in rechargeable lithium-polymer battery with a capacity of 400 mAh.
- Battery charge status indication in the button.
- Charging via a modern USB-C connector.
- Memory for the last set white light power mode.
- Intelligent overheat protection.
- CNC-machined aluminium alloy body with Type III hard anodized surface finish against scratching.
- Dimensions 5.25 cm (length) x 2.6 cm (width) x 1.3 cm (height).
- Beam distance 90 metres (2082 cd).
- Weight 30 grammes (including battery).
- Water-resistant to IP66 standard (spraying with strong water jets from all directions).
- Impact-resistant to drops from a height of 1 metre.
- The package includes a key ring attachment and a USB-C charging cable.
- You can purchase an additional USB-C cable, a coloured USB-C cable or a micro-USB to USB-C adapter.
Use
To turn on or off, hold the side button for approximately 0.5 seconds. To turn on red light, hold the button for 1.2 seconds. You can switch power modes at any time during operation by pressing the side button. To turn on Breathing light, turn off the torch and press the button twice quickly.
The control button can be locked to prevent accidental activation, for example when transporting in luggage – to lock, turn off the torch and hold the button for 3 seconds. The torch will then flash twice, signalling that it is locked. To unlock, hold the button for 3 seconds again.
Battery charge indication – with the torch off, press the button once briefly, which will light a small LED in the button for three seconds. Green light indicates the battery is charged to 100–85%, green flashing indicates 85–50%, red light signals the battery is charged to 50–25% and red flashing indicates the battery is charged to less than 25%.
Overheat protection – if the torch temperature exceeds 60°C, the power will automatically reduce. Once the temperature drops below 60°C, you can use the highest power again.
Low battery warning – the torch will gradually automatically switch to the lowest power mode and the indicator LED in the power button will start flashing red.
Charging
- Flip off the rubber cover of the USB-C connector and connect the torch to a computer, mains USB adapter or car USB adapter using the USB-C cable. You can also use any mobile phone charger with a USB-C connector for charging.
- During charging, the indicator LED in the button glows red; when fully charged, it glows green.
- The charging time for a fully discharged battery is approximately 2 hours.
- The Li-pol battery used does not suffer from memory effect, so you can charge the torch at any time.
- Securely seal the USB connector cover after each charge.
Warning
- Do not disassemble sealed parts yourself, as this will void the warranty.
- In damp environments, ensure that the USB-C connector cover is properly seated in the torch.
- If the torch does not switch to higher power modes or does not light up, the battery is discharged – charge the torch.
Warranty
Two-year warranty.
30-day returns
30-day returns
We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.
For more information, please see our Return Policy here.
Delivery
Delivery
Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.
Free delivery from €200 / for oversized shipments from €400
Free of charge, ready for pickup on the next business day
For more information, please see our Delivery page.
Payment details are processed through a secure system.